5 & 15 Minute FE/BR Teller Window
The FDITW05M and FDITW15M
Forced Entry
Resisting Window
Systems are designed
the same as our non
pass-thru models but
include a steel
counter with
stainless steel pass
thru for document
exchanges.
Features
-
Steel
construction
-
Glazing
component
easily
field
replaceable
-
Multi-impact
and
forced
entry
resistant
-
Custom
sizes
available
-
Shipped
glazed,
ready
for
installation
-
Steel
counter
with
stainless
steel
pass
thru
tray
standard
(outdoor
tray
covers
available)
DOS
Codes and
Model
Numbers
- DOS
1141
GWT-05N-FDI-01
- DOS
1123
GWT-15R-FDI-01A
|
Glazing
Glazing Materials
shall be of a type
approved by H.P.
White Laboratory for
Forced entry.
Limitations
The Teller Window
Series (FDI-FW05M)
was primarily
developed to
compliment the
FDI05M door series
and the FDI-FW05M
fixed window in
those areas where
additional,
non-transactional
type glazing is
required. This
sturdy and boldly
designed unit is
capable of
withstanding
repeated physical
assaults.
System Construction
- Frame
assembly is
constructed of
steel angles and
tubes. Framing
dimensions are 2
¼” wide by 5”
deep.
- Frames are
fabricated and
shipped
completely
glazed ready for
installation
- All joint
connections are
welded to
provide a rigid
assembly when
installed
- Frames are
pre-drilled to
accept ½”
anchors 8” o.c.
- Steel
counter complete
with stainless
steel tray 12”
deep
Sizes
All window units
are made to order
Openings
Standard rough
opening is required
to be 3/8” to ½”
larger than window
dimension.
Finish
Standard: All
steel window frames
are furnished prime
painted.
Optional: Factory
applied enamel can
be provided. Also,
aluminum trim in
clear and bronzed
anodized, bronze,
stainless steel and
brass are available
for a premium.
Contact factory for
information.
Applicable Standards
- DOS
SD.STD-01.01
(Rev. G amended)
------------------------------------------------------------------------------------------------------------
Glazing
Glazing Materials
shall be of a type
approved H.P. White
Laboratory for
Forced entry and
ballistic
protection.
Limitations
The FDI-TW15M
Teller Window Series
was primarily
developed to
compliment the
FDI15M door series
and FDI-FW15M fixed
window in those
areas where
transaction type
glazing is required.
This sturdy and
boldly designed unit
is capable of
withstanding
repeated physical
assaults and
multiple impacts.
Construction
- Frame
assembly is
constructed of
steel plates,
angles and
tubes. Framing
dimensions are 2
¾” wide by 5 ½”
deep.
- Frames are
fabricated and
shipped
completely
glazed ready for
installation
- All joint
connections are
welded to
provide a rigid
assembly when
installed
- The caulk
space is
protected
against
ballistic and
physical assault
- Frames are
pre-drilled to
accept ½”
anchors on 8”
center as
required
- Steel
counter 12” deep
with stainless
steel tray
Standard
- Steel sub
frame
recommended.
Sizes
All windows are
made to order.
Openings
Standard rough
opening is required
to be 3/8” to ½”
larger than window
gap cover dimension.
Finish
Standard: All
window frames are
furnished prime
painted
Factory applied
polyurethane enamel
can be provided.
Also, aluminum trim
in Clear and Bronze,
Stainless Steel, and
Brass are available
for a premium.
Contact factory for
information.
Applicable Standards
- DOS
SD.STD-01.01
(Rev. G amended)
Sub-frames
or Embeds available
for installation in
existing or new
rough openings.