FDI60M Bullet & Forced Entry Resistant Door
System
Features
- Designed
to Meet 60-Minutes Forced Entry Protection
- Multi-Impact
High Power Rifle Resistant
- Heavy
Duty Steel Construction
- Door
and Frame shipped as a Complete Unit
- Opaque
Only
DOS Codes & Model Numbers:
Opaque
Product Description
The FDI60M Forced Entry Resisting Door System is capable of resisting 60
minutes of forced entry assault and defeating multiple impacts of 7.62mm NATO
and 5.56mm projectiles as defined by applicable U.S. Government Standards.
Basic Use
This door system is used to provide protection in those areas susceptible to
mob or terrorist attacks. Applications are likely to be at safe haven rooms
where prolonged protection is required.
Limitations
This door has been designed to meet the rigid specifications developed by the
U.S. Government for 60-minute forced entry and high power rifle impact. It is
recommended that each end user determine the ballistic and forced entry threat
and choose the appropriate product to meet and resist that threat.
Specifications/Construction
Door construction:
Doors and frames are full flush construction of ballistic steel plates and 1 ฝ
steel tube. Vertical jambs and header contain bullet-resisting material equal to
protection level of the door.
Door Frame
Construction: Door frame assembly is
constructed of steel tubes. Framing dimensions are 2 wide x 5 ฝ deep.
Door frames are completely fabricated at factory and shipped with doors
attached. All doors are pre-tested for all locking functions, clearances, and
ease of operation, to ease field installation. All joint connections are welded
to provide a rigid assembly when installed. The doorstop is built into the
frame. Frames are predrilled to accept ฝ anchors 12 on center. Shims are
provided to take up a space at each anchor. Wiring diagrams are shipped enclosed
in the hardware packages.
Hardware Assembly:
Each door is equipped as follows:
- Door
Closer (LCN 4041 CUSH)
- (3)
Forced Entry Locks (Adams Rite 1850S w/ 15tt Thumbturns)
- Continuous Hinge (Roton 780112HD)
- Aluminum Threshold (Pemko 177AV36)
- Weather Stripping (Pemko SS88D17)
Optional Hardware: Refer to the
SHW group page for additional hardware information. You must select a lockset, pull handle, or
panic device that suits your application. Most hardware is shipped pre-assembled
with the door unit.
Subframes: To meet forced entry requirements of DOS SD.STD-01.01 (Rev. G
amended), steel tube subframes ผ wall thickness minimum, must be attached to
concrete or masonry with Hiltiฎ Epoxy Anchoring System. An acceptable
alternative is the use of steel embeds, ฝ thick minimum. These systems are
included as options in our product line.
Finish: All doors and frames are furnished prime painted, ready for final
finish in field. Options: Factory can apply polyurethane enamel; link to color chart is available on the main page. Doors can also be fitted with various types of
architectural metals.
Applicable Standard
ท DOS SD.STD-01.01 (Rev. G amended)
Weights and Measurements
Standard Door:
Door Thickness: 2
Frame Depth: 5 ฝ
Door Size: 36 x 84
Frame Size: 40 x 86
Rough Opening: 41 ฝ x 86 พ
Gap Cover Dimension 41 x 86 ฝ
Shipping Weight: 1500 lbs
| 
